Henry Big Boy Rifle- The Henry® Big Boy Centerfire Lever-Action Rifle is a hard-hitting, fast-handling centerfire lever-action rifle, with enough fire power for hunting deer and hogs, bear protection, or home defense. The Henry Big Boy features a hardened brass receiver with enough strength to handle all magnum ammunition. The receiver is equipped with a solid top with side ejection, and is drilled and tapped for a scope mount. There is no loading port on the side of the receiver, as ammunition is loaded directly into the tubular magazine for quick, quiet reloading. The Henry Big Boy utilizes an internal transfer bar safety that prevents hammer contact with the firing pin unless the trigger is pulled, ensuring the rifle cannot fire from being dropped onto the hammer, nor will it accidently fire if the shooter’s thumb slips from the hammer while cocking. The trigger pull is crisp and clean, allowing for fine accuracy, and the traditional blued octagon barrel features a fully adjustable semi-buckhorn rear sight and a dovetailed brass bead front sight for quick, intuitive target acquisition. The Henry Big Boy is an attractive lever-action rifle, with a checkered American walnut buttstock and fore-end, and a brass butt-plate and barrel band.
- Perfect for hunting deer and hogs
- Hardened brass receiver
- Drilled and tapped
- Side ejection
- Internal transfer bar safety
- No manual cross-bolt safety
- Blued octagon barrel
- American walnut stock
- Brass accents
Gun Review: Henry Big Boy Rifle in .44 Magnum
For students of the history and romance of so-called cowboy rifles, Bayonne, New Jersey isn’t a particularly evocative locale. Ilion, New York (Remington). New Haven, Connecticut (Marlin). Those are the places where West-winning long guns were born. Even though the virtues of the long guns made in those storied factories have withstood the test of time, times have changed. I reckon we can add the Hudson County hang to the roll call. For that’s where Henry Repeating Arms Co. makes its lever action rifles, including the .357, .44 and .45 Big Boy . . .
The Henry Big Boy is a lever-action centerfire rifle with a fully octagonal 20-inch barrel, a solid brass receiver, and a 10-round tubular magazine. It’s a larger version of Henry’s successful Golden Boy rimfire rifles and similar to Henry’s new brass-framed .30/30 rifle. Our test gun was chambered in hard-hitting .44 Magnum.
Despite its name and its stunningly beautiful brass receiver, the Big Boy is not a replica of the original Henry Rifle (a.k.a., “That damned Yankee rifle you can load on Sunday and shoot all week”). The Big Boy’s action is nearly identical in operation to that of the venerable Marlin 336. Henry’s version has a solid receiver and a round bolt with one rear locking lug. Unlike the 336’s receiver-based loading gate, the Big Boy reloads through a port in the front of the magazine tube (after removing the magazine plunger). Henry Big Boy Rifle
Dropping cartridges down a tube isn’t the handiest way to load a rifle, although it can be less painful than getting your fingers jammed in the loading gate of a Marlin or Winchester design. It won’t matter for hunting; if your deer (or elk or moose or whatever) isn’t down after ten rounds of .44 Magnum you need to give up hunting and take up Contract Bridge.
Reloading the Henry in a high-stress or situation is as practical a proposition as a kickstand on an Abrams tank. And? While I doubt owners would use their Big Boy .44 for defensive purposes, the rifle’s magazine capacity, decisive ballistics and quick action would make it a fearsome home defense weapon—at least until it ran empty.
Owners of tubular-magazine Marlin .22 rifles will be familiar with the hazards of trying to empty unfired rounds by dumping them out the end of the tube. It’s a lot more fun to keep shooting until the gun runs empty. Unless you’re a handloader you’ll probably want to restrain yourself. At about $.80 a round, factory .44 Magnum ammo is about the same price as .30/30 or bulk .308.
The Big Boy has no manual safety of any kind. Henry’s lawyers must have gone into convulsions when company president Anthony Imperato made the call; this ballistics-crazed brief gives the decision two big thumbs-up. There’s no half-cock notch. But there are two passive safeties: a trigger block prevents the gun from firing unless the lever and bolt are fully closed and locked, and a transfer bar passive safety allows the rifle to be carried safely with the hammer down on a live round.
A Brass Receiver? Really?
Yep. Really. Well, sort of. The Big Boy’s receiver is machined from a solid lump of a proprietary brass alloy. Henry claims it has the same tensile and yield strength as steel. Despite some speculation in the gun forums (fora?) about the strength and durability of the non-steel receiver, my search for “Big Boy Frame Failure” didn’t turn up a single complaint.
As you can see from the picture below, the Big Boy’s receiver is massively thick. Company president Anthony Imperato states that the Big Boy can handle any loadings within the SAAMI pressure limit (36,000 PSI for the .44 Magnum). If you’re a glutton for shooting expensive ammo, Buffalo Bore makes Big Boy-safe .44 Magnums that deliver nearly 2,000 lb-ft of muzzle energy. That said, their very heaviest .44s are not recommended; the slow-twist barrel may not properly stabilize the heaviest .44 Magnum bullets. But the Big Boy [reportedly] does fine with bullets up to and including 270 grains. Henry Big Boy Rifle
Fit and Finish
Shooting this rifle is a thrill and a joy, but those who appreciate quality will get a different kind of thrill from just handling and touching it. It’s a perfect composition in steel, brass and walnut.
The fit, finish and assembly of the Big Boy is equal or superior to that of any factory-made firearm I’ve ever handled. Period. The full octagon 20-inch barrel is blued in a deep, lustrous black that I’ve only found on handcrafted classics from the pinnacle of American gunmaking: pre-’64 Winchester Model 70s, 1960s Remington Model 700 BDLs, and 1960s Smith & Wesson revolvers.
From its polished brass buttplate to its Hawken-style muzzle, this rifle radiates quality and attention to detail in both design and execution. Heaven is in the details; the machined steel rear sight from Marble Arms (the devil is there, too) and the gold, antique-typeface barrel markings; the perfectly-machined octagon barrel; the solid-brass magazine plunger with its captive steel follower. And that’s just the metalwork: the woodwork is equally stunning.
Both the buttstock and fore-end are cut from lightly figured American walnut with an incredibly smooth satin finish. Wood-to-metal fit is outstanding all around. The rifle’s original stock cracked at the wrist after the rifle took an unintentional tumble (Farago almost cried). Henry sent us a replacement stock set. Although they were made months apart from each other, the new stock slipped onto the receiver tang as snugly and neatly as if the pair had been hand-fitted together. That, dear readers, is quality control. Other gunmakers (cough Marlin cough) would do well to emulate it.
You won’t see me trying to cram any business cards between the wrist and the receiver flat, but you can make out a Van Eyck-esque distorted reflection of my hands and camera as I took the picture. Henry Big Boy Rifle
I took the Big Boy to my grandparents’ old family farm outside Kalispell, Montana with the hopes of shooting it extensively in a beautiful, private location at ranges of 100 yards and beyond. A half-dozen pastured horses prevented me shooting at more than 35 yards. Even so, my results at that modest range were astounding. To me, at least.
My eyesight is no longer correctable to 20/20. As a result, I generally shoot like crap with iron sights at anything other than short ranges. I knelt in the dirt behind a folding table and squinted through the Big Boy’s buckhorn rear sight while shooting the groups above. My first three shots from the Big Boy went into the lower cloverleaf on the target above, and the second three shots went into the upper cloverleaf. In each group, the center-to-center distance is slightly less than 0.5 inches.
When I got home, I took the Big Boy to my local range for some proper bench testing at longer ranges. My dodgy eyesight began to tell. My wonderful cloverleaf groups disappeared. I also discovered that our sample Big Boy has a problem which seriously impairs its practical accuracy: the Marble rear sight rides too loosely on its elevation ramp.
Under recoil, the ramp slides loose and the sight drops down to its lowest position. ometimes it lowers itself one notch at a time, and sometimes it just drops all the way. The result is pronounced vertical stringing like this:
All of the groups were centered horizontally about 1.25 inches left of the bull at 50 yards; once the elevation ramp issue is addressed, I’ll drift the rear sight a hair to the right. Henry Big Boy Rifle
Including the wandering rear sight, at 50 yards my groups averaged exactly 2.5 inches, even including one really bad shot I knew I yanked three inches off to the left. This average is actually pretty damned good for me with iron sights. But it doesn’t reflect what the gun’s capabilities of a stable rear sight and 20/20 vision. Or a scope.
When I statistically ‘correct’ for the loose rear sight by measuring only the horizontal width of the groups (which were extremely consistent except for that one blown shot) we get a better picture of how well your humble correspondent could shoot the Henry Big Boy .44: 1.25 inches at 50 yards.
At 100 yards I’m usually a basket case with iron sights; I can empty a National Match Garand into a CMP target and only land thee shots on the black. The loose rear sight caused even more pronounced vertical stringing. My groups ranged from 2.4 to 6.5 inches. Removing the vertical deviation, my groups were between 0.75 inches and 1.5 inches wide, and centered about three inches left of the bull.
Lacking the precision that only a scope (or better eyes and a precision aperture sight) can provide, I can only estimate at the Henry Big Boy’s potential accuracy. I figure it would shoot 2 MOA or better, as long as the shooter remembers the football-like trajectory of the .44 Magnum.
Functioning And Handling
We don’t really have a ‘testing protocol’ here at TTAG. Every type of gun suggests a different set of testing priorities. It’s cheap, fun and entirely practical to run 1000 rounds through a semi-automatic .22 rimfire during testing. A 600-round AR-15 test takes a lot of planning and resources. Test-firing 100 rounds of .338 Lapua or .375 H&H (yes, we’re working on those) will leave you bloody, bruised and bankrupt. Henry Big Boy Rifle
The price of .44 Magnum ammunition put some limitations on the quantities of ammo we could afford to run through the Big Boy compared to other pistol calibers. After about 30 rounds, I experienced a single malfunction: the lever screw loosened itself. The rifle seemed to seize up; it wouldn’t cycle fully after about 30 rounds. When I jiggled the lever slightly and tightened the screw with my fingernail the gun resumed full function. A drop of blue Loctite (not the permanent red stuff) will prevent this from happening again.
Brass is a fairly soft metal which glides smoothly over many other metals. This makes it an excellent material for cartridge cases and bullet jackets. It also gives brass-framed rifles a smoothness of action that’s difficult to achieve when steel rubs against steel. The Big Boy’s lever is slicker than a buttered Benelli. The trigger breaks very cleanly at slightly over four pounds. Our Marlin 1894C had to take an Alaskan summer vacation, courtesy of Wild West Guns before it felt as slick as the Big Boy felt straight out of the box.
When it comes to handling, the .44 Magnum Big Boy teaches you very quickly how it earned its name. At eight pounds, 11 ounces it’s as heavy as my .357 Magnum Marlin 1894C and my S&W Model 686 together. It’s heavy enough that you’d think twice before carrying it up a mountain in search of elk or deer. And by ‘carry’ I mean carry: the Big Boy has no sling attachment points. I’d slit my wrists before I’d let a gunsmith drill into the almost presentation-grade walnut of the Big Boy’s stock and fore-end.
Leaving it behind would be a mistake, however. Those extra pounds mean the Big Boy lacks the marvelously quick handling of a smaller, shorter carbine like the .357 Magnum Marlin 1894C. But in offhand firing the Big Boy’s gravity suck soaks up the recoil of the .44 Magnum. Much of the Big Boy’s weight is carried in its octagon barrel, which makes it very steady on target. Henry Big Boy Rifle
And this all works for me. The .44 Magnum Big Boy isn’t a pistol-caliber carbine; it doesn’t need to handle like one. It’s a man’s rifle with nearly the power of a .45-70. I wouldn’t use the Henry Bog Boy .44 to snipe elk across a canyon. It wouldn’t be a prudent choice for stalking brown bear. But big .44 (or .45) bullets at moderate velocities have an almost mythical reputation for dropping all but the biggest game dead in their tracks. Within 150 yards, that game is going down.
I was surprised at the recoil I felt from the Big Boy’s .44 Magnum cartridge, however. When firing offhand it’s hardly noticeable. From a bench (where I spent most of my time) it is surprisingly sharp. By the end of my range day I sported a nice bruise on my right shoulder. I wished I’d followed my uncle’s sage advice to use a Limb-Saver recoil shield.
In terms of customization, the Big Boy is a rather unique case. Almost anything you do to modify it will ruin its classic styling. Karma will punish you with a merciless kick to the groin if you desecrate your Big Boy with a bipod, tactical light, or tri-rail scope mount. The horror! And you’d better not have your gunsmith drill into the brass receiver to mount scope rings, because the tiny screws will strip out the softer brass in no time.
However, there are a few mods you can make to your Big Boy without completely spoiling it. The Henry website sells factory-custom big loop levers and cantilever scope mounts for a ridiculously affordable $50 and $27.50, respectively. And if you happen to bend or break your brass magazine plunger assembly, they’ll replace it for an unbelievable $21.50.
If Henry recoups their production costs at these prices, it shows that they’ve really got their manufacturing down to a science. And if they can’t recoup their costs and they’re willing to take a small loss to keep their customers happy that’s pretty neat too. Henry Big Boy Rifle
In fact, the only ‘expensive’ Henry factory accessory is the one I’d want the most: the walnut wall-mounted display case for $150.
Born In The USA. Completely.
Unlike many modern guns, all Henry rifles are manufactured and assembled domestically, using parts and materials sourced entirely in the USA. The brass receivers are cast and machined in Pennsylvania. The walnut stock blanks come from Missouri, Iowa and Kansas. The bolt steel comes from Pittsburgh. And the barrel steel is forged in Ohio.
I point this out because the lever-action is the quintessential American rifle, but few of them are still made in America. Browning BLRs and Winchester 1894s are made in Japan, Cimarron rifles are imported from Italy, and of course Rossis are built in Brazil. Marlin used to make their rifles in North Haven, Connecticut, but now of course they’re not making them at all. For a while anyway.
Farago and I haven’t been shy in chronicling the shortcomings of Marlin and their 1894C carbines. While testing the Henry Big Boy and writing this review, I inevitably found myself comparing the two. It’s been a challenge to try and evaluate the Henry on its own merits. It’s important because this article is not about Marlin. It’s about the rifle that’s going to eat Marlin’s lunch. Henry Big Boy Rifle
This is a rifle you’ll leave to your children, but not until you’ve hung it over your mantel (spouse willing) for a few decades because your friends and neighbors—-shooters, hunters and anti’s alike—will gaze at it thinking goddamn, that’s one beautiful rifle.
Whether shooting or sitting still, Henry’s Big Boy is a breathtaking exemplar of classic rifle styling and craftsmanship. It’s a man-sized rifle that (with the rear sight fixed) delivers solid accuracy and sledgehammer-like knockdown power for hunting just about anything within 150 yards. It’s also an awesomely fun (if expensive) recreational plinker: if you hit an empty soup can right on its bottom rim in the dirt that 240-grain bullet will send it into Near Earth Orbit.
In fact, the Big Boy’s beauty is its only real drawback. It’s so lovely I’d feel like a criminal the first time I put a ding in the stock or a big scratch in the receiver flat. [ED: Tell me about it.] Cleaning the Henry Big Boy takes longer than most rifles; most rifles don’t beg you for a final polish with Brasso after you’ve wiped off the soot and fingerprints. A task which is more of an honor than a chore.
Yeah, it’s that good.
SPECIFICATIONS: Henry Big Boy Classic Rifle
Caliber: .44 Magnum/.44 Special
Barrel: 20 inch full-octagon, 1 in 38 inch twist
Overall Length: 38.5 inches
Weight: 8 pounds, 11 ounces
Action: Lever-action, tubular magazine, external hammer w/transfer bar passive safety
Finish: Polished brass, blued steel, walnut
Capacity: 10 (.44 Magnum), 11 (.44 Special). Henry Big Boy Rifle
RATINGS (out of five)
Ergonomics: * * * *
Excellent trigger, extremely smooth action and light recoil (when you’re firing offhand) with big-game ballistics. Although historically and aesthetically correct, subtract one star for the optically challenging iron sights and the lovely but slippery brass buttstock.
Reliability: * * * *
You don’t want a seized-up lever when that moose is in your sights, so don’t forget to Loctite the lever screw.
Customize This: * *
This gun is already pretty well customized. Scope it for medium-range precision and customize it with a big loop lever from the factory if you want to. I’m not sure how to put a sling on it.
Overall Rating: * * * * 1/2
Stunning beauty and craftsmanship in a fun, hard-hitting rifle that will last for generations. Henry Big Boy Rifle