Ruger Precision Gen 3 Rifle – .308 Winchester
Ruger Precision Gen 3 Rifle – .308 Winchester
Ruger® built the Ruger Precision® Gen 3 from the ground-up, specifically for long-range, tactical shooting. The Gen 3 Precision Rifle comes with a new, free-float M-LOK® handguard that provides greater clearance with large diameter objective lens. The Gen 3 also comes with a muzzle brake, featuring a hybrid port design that reduces recoil by up to 40–60%, and reduces muzzle blast, directing it to each side of the shooter’s line of sight. A billet-aluminum bolt shroud also enhances the Gen 3 rifle. The upper receiver and one-piece bolt are precision CNC-machined from pre-hardened 4140 chrome-moly steel to minimize distortion; and a 20-MOA Picatinny rail is secured to the receiver with 4 #8-40 screws. The bolt has 3 lock lugs, resulting in superior strength and a 70º throw. The Precision MSR buttstock attaches to an AR-style buffer tube on a left-folding hinge, and the stock adjusts for length of pull and comb height. The buttstock features QD sling attachment points, a bottom Picatinny rail, and rubber buttpad. The buffer tube accepts any AR-style stock. An extended trigger-reach, AR-style grip, and a 45º reversible safety selector provide ease of operation, and the rifle is compatible with any AR-style grip or selector. The cold hammer-forged 4140 chrome-moly steel, medium-contour barrel has 5R rifling. The barrel nut enables close-tolerance headspacing, and a Marksman Adjustable™ trigger breaks clean to enhance accurate shooting. The Ruger Precision Rifle Gen 3 utilizes a multi-magazine interface that functions with AICS, polymer AR–10, and Gunsite Scout magazines. Includes two 10-round Magpul® PMAG®magazines.
- For long-range, tactical shooting
- Short-action M-LOK® handguard
- Billet-aluminum bolt shroud
- Hybrid muzzle brake
- AR-style buffer tube on left-folding hinge
- Adjustable Precision MSR buttstock
- CNC-machined steel upper receiver
- Chrome-moly steel barrel
- 3-lug bolt with 70º throw
- Multi-magazine interface
- Two 10-round magazines
- 20-MOA receiver rail
REVIEW: Ruger Precision Rifle Gen 3: Even Better
By ALEX LUFFO FROM gunsdiscreetsupplies.com
If there’s one thing the firearms industry has plenty of…it’s “revolutionary” products.
And 90% of the time, it’s pure propaganda.
Originally released in 2015, the Ruger Precision Rifle was designed from the ground up to take the advantages of high-end rifle chassis systems like the MDT TAC-21 and to then bring those advantages (which we’ll dig into more in a moment) to the average consumer at a more affordable price
And for the most part, that original first gen RPR did exactly that. Ruger brought a chassis rifle to market at a then-shocking price of about $1,200. It’s no exaggeration to say that this rifle changed the industry.
That’s in large part due to the RPR and the rifles it inspired like the Bergara B-14, Mossberg MVP-LC, and the Tikka T3 Tactical making it easier than ever to just pick up a rifle at the local gun store, no custom modifications needed and go out and compete for under $2,000.
Let’s get to it.
Given the fact that the RPR has only been out for about four years now, and chassis rifles, in general, haven’t been popular in the mainstream for very long, there’s probably a fair few of you out there wondering…what is a chassis rifle, anyway?
The same is true in the world of rifles. The chassis of a rifle is the foundation that the action, trigger, optic, barrel and everything else is supported by.
As any long-range shooter will tell you, consistency is the key to accuracy, and that’s the primary benefit of a chassis system like that of the Ruger Precision Rifle.
Instead of traditional bedding blocks and fiberglass filler, you have a solid piece that attaches to the action and leaves the barrel completely free to do its thing without any exterior interference.
Also, a chassis allows you to quickly install a new action with just the turning of a few screws…no gunsmithing, custom fitting, or precision bedding work required. I have put barreled actions in chassis systems in under ten minutes before, and barrel swaps take about as long. Ruger Precision Gen 3 Rifle
They’re definitely a boon to gunsmiths if nothing else.
Furthermore, with about 90% of chassis setups, you get a level of modularity that you otherwise wouldn’t with a more traditional stock. On the RPR for example, you can swap the handguard, pistol grip, and buttstock out for any of the myriad of AR-15/AR-10 compatible examples out there.
The RPR also comes with a threaded barrel and a threaded bolt handle so you can swap in whatever muzzle device you want, along with a fancy bolt handle if the stock one isn’t to your taste, or you’re like me and just enjoy personalizing your firearms.
What Makes the Ruger Precision Rifle so Great?
I don’t know who exactly has been behind the upsurge in quality new products from Ruger over the past several years, but they’ve been putting out some really affordable, well-designed products of late.
The original RPR is very much a reflection of this dual focus on affordability and practicality.
They built a competent precision chassis rifle from the ground up and left out all the unnecessary bells, buzzers, and whistles that other companies might have been tempted to throw in to command a higher price point.
What we’re left with is a lean, well-appointed, and thoughtfully put together a rifle that offers one of the best values in the industry.
Furniture and Muzzle Brake
The first generation Precision Rifle had a highly adjustable folding stock that could be tweaked for the length of pull, comb height, and fore and aft cheek rest position. This kind of highly adjustable stock was, at the time, extremely rare on factory rifles in this price point. The Gen III model has the same stock as far as I can tell, and it is still as rock-solid as ever. Ruger Precision Gen 3 Rifle
One of my very few quibbles is that the cheek rest can be a bit of a bear to get locked into position as the vertical and fore/aft adjustment is controlled by the same lever, so adjusting it takes some fiddling to get right.
Other than that, the stock is fantastic in my opinion, and a good mix of adjustability and affordability.
You also have a rail section on the toe of the stock where you can add a monopod, or if you’re like me and plan to use a sandbag or squeeze bag, you can just throw a grippy rail cover on and call it a day (or leave well enough alone and leave it as is).
I also really love the folding stock as it makes transport and storage a breeze, and it locks into either an open or closed position with authority.
I’ve lugged this gun through the woods on backcountry hunts this past fall (although at almost 15lbs with optic and bipod, it was more of a workout than I wanted) and I’ve beaten it up at PRS club matches, and let friends abuse it at the range as well, and the stock still locks into position as solidly as it did the day I took it out of the box.
With the stock folded out of the way you can also easily remove the bolt for cleaning, no tools or finicky disassembly required. Ruger Precision Gen 3 Rifle
And of course, if you don’t like the stock, you can swap it out for any buffer tube-compatible stock. The Magpul PRS stock is a popular choice, and I personally love the Luth MBA-3 stock, but you can throw whatever you want on there.
Moving forward a bit, you have an AR-style pistol grip that you can leave alone, or swap out to your preferred version. The grip you get is adequate, but nothing special, and you probably have an AR-type grip you’ll like better.
I highly suggest experimenting with other grips because they’re a cheap and easy way to customize your rifle, and getting a consistent, comfortable grip is key to being successful with precision shooting.
The new RPR has an M-Lok forend as opposed to the Keymod version on the original. I, personally, don’t have super strong feelings one way or the other, but for what it’s worth, the M-Lok attachment method is ever so slightly and it seems to be a little more popular in general now, which makes finding attachments easier.
This handguard also comes with a small rail section and a couple of QD cups so you can easily slap a sling and a bipod on the rifle. You also have a full-length rail on top, including a 20-MOA rail above the receiver, which is perfect for most of the shooting you’ll be doing with this rifle. Ruger Precision Gen 3 Rifle
You also get a pretty excellent muzzle device on the end of the barrel, Ruger’s hybrid muzzle brake, which does an admirable job of taming the already light recoil of the heavy rifle.
It’s an adjustable affair with a safety blade very similar to the Savage Accutrigger, meaning you can tune it down to a very light pull weight and not have to worry about it being set off by inertia if you happen to bump or drop it.
My RPR trigger came set at 2.5lbs almost exactly, and while you can adjust it from 2-5lbs, I never felt a need to fiddle with it, although if you are so inclined, it’s a fairly easy affair, and the Allen wrench you need is hidden in the bolt shroud.
The trigger isn’t the best I’ve ever had my finger on, but it’s damn close, and may very well be the best factory trigger I’ve ever pulled, certainly if you only count other rifles in the RPR’s price range. Ruger Precision Gen 3 Rifle
Given the RPR’s popularity though, you’ll have no problem finding an aftermarket drop-in option, or parts like new springs or a new trigger shoe. Timney makes an outstanding 2-stage drop-in replacement trigger for the RPR now too!
The safety is a 45-degree model that will feel familiar to anyone that’s handled an AR-style rifle before. It doesn’t lock the bolt, so the rifle can be cycled with the safety on, which I like, and the safety is solid and tactile which is always good.
Extending down at the rear of the AICS/SR25-compatible magwell is where you’ll find the magazine release tab, very AK or HK feeling to it.
Two included Magpul magazines drop free easily, and actually lock the bolt back, which you might like, or you might hate if you’re looking to manually feed single rounds into the chamber from the top.
That said, AICS mags won’t lock the bolt back, so that’s an easy fix. Either way, new magazines are cheap.
One last note about the mag release: it has a hole in it for the Allen wrench hidden in the bolt shroud. You run the wrench up through that hole to adjust the trigger pull weight. Ruger Precision Gen 3 Rifle
Speaking of the bolt, it’s a three-lug job with a 70-degree throw, and is almost identical to the bolt in the Ruger American Rifle, save mostly the extended shroud on the end, and the bolt handle. That shroud helps the bolt cycle smoothly in the buffer tube-esque rear of the receiver.
Alright, that’s all the features and crap out of the way. All that sounds really good of course, but how does the gun shoot? That’s what really matters after all.
Honestly, better than it has any right to, in my opinion.
Don’t get me wrong, Ruger makes good stuff. They’re one of my favorite manufacturers, in case you couldn’t tell.
And I had, of course, read all the press about the Gen I and Gen II RPR’s so I knew the rifle did alright, but I was still wildly unprepared for how the gun would do at the range.
The RPR comes chambered in .223, .308, 6mm Creedmoor, and 6.5mm Creedmoor, with the slightly more expensive Magnum version available in .300 Win Mag and .338 Lapua Mag (which I desperately want, but we’ll save that one for later). Ruger Precision Gen 3 Rifle
I personally love the 6.5mm Creedmoor cartridge, so that’s what I went with for this gun as I think it’s the best choice for a PRS rifle, though the 6mm Creedmoor version is just as good. The .308 I would avoid unless you’re already very used to the round, and the .223 version is more of a training rifle so you can shoot a similar beast, but feed it cheaper ammo.
In the spirit of the “everyman’s precision rifle”, I put a cheapo Caldwell bipod on the gun, topped it with a very affordable Vortex Diamondback 6-24×50 scope, and went to the range with a few different factory ammo options.
Yes, if I wanted to make a serious run at a PRS match with this gun, I’d throw an Atlas bipod on the gun, swap out the stock and handguard, work up a handload, and probably top it all off with a scope that costs twice as much.
How about .75 MOA accuracy with factory ammo? My rifle liked Hornady’s ELD-M factory ammo the best, and with those loads I was hitting T-box targets at 400 yards with no issues whatsoever.
The “T-box” for those of you who aren’t familiar, is the area snipers and other tactical shooters are trained to aim for. It’s the area around the eyes and nose that you put the third shot of your “failure to stop” drill into.
Go look in the mirror and see how big that area is. Unless you’ve got an exceptionally big noggin, you’re looking at an area about the size of an index card. This rifle was hitting that size target out of the box, within one ten round magazine. That’s absolutely insane to me.
Stretching the legs on the gun a bit further, I was hitting IDPA-sized targets at 600 yards with shot after shot, and in later range sessions had no problem reaching out to targets at the thousand-yard line.
Since then, I’ve put maybe 500 rounds down the barrel, and I’ve never once had any reason to doubt the gun. I even dragged it through the woods and over the mountains of North Georgia on a deer hunt just for shiggles and gits, and I didn’t have a single issue.
Other than being reminded how much it sucks lugging an almost 20lb rifle through the woods. But hey, this isn’t a hunting rifle, not really. This gun is designed to win long-range shooting competitions.
And in the right hands, it most certainly will.
Upgrading the Ruger Precision Rifle
The Ruger Precision Rifle is designed to be good to go out of the box, but perhaps the best thing about it is the fact that it can grow with you as you find out what you like as a shooter, and what you need to succeed.
The barrel is held on with a proprietary barrel nut from Ruger, but you can easily upgrade the barrel and handguard if you’re so inclined.
Personally, I want a nice carbon fibre barrel from Proof Research for mine, but they’re expensive as all get out (with good reason).
Other than that, I like the Luth MBA-3 stock, and the Magpul MIAD grip, and I want to find a lighter-weight handguard at some point. In general, the rifle is as customizable as you could want, and you’ll have no problem making a great rifle even better, or just making it more your own. Ruger Precision Gen 3 Rifle
By the Numbers
The rifle is…heavy. Not quite overly so, but it’s definitely not a lightweight hunting rifle. Other than that though, either the rifle will be comfortable, or you can quickly adjust/swap parts to make it comfortable for yourself.
Again, the gun is more accurate than it has any right to be. The only things that are going to beat this gun definitively are going to cost twice to three times as much, and will probably need to be custom ordered. Good luck finding something off the shelf that will give you a significant performance upgrade, and still be in the same price bracket. Ruger Precision Gen 3 Rifle
It’s a precision bolt action rifle. There’s nothing on it that’s going to fail you.
If you want to change it, you can. The chassis system and the overall design means that just about everything is either adjustable or replaceable. You can even strip it down to the action and replace the chassis if you want.
It’s got a decidedly military-esque, AR-15-style aesthetic that it’s hard to find fault with, and you can get a number of factory Cerakote options, including a Marine Corps red, and an American Flag paint job for maximum freedom points. I’d like to see more factory colors, but hey. You can’t have everything at this price point. Ruger Precision Gen 3 Rifle
Speaking of, holy crap the price. This thing is almost criminally cheap and frankly, I have no idea how Ruger makes money on them. I honestly can’t think of a better value out there in the firearms industry right now.
The Ruger Precision Rifle is an affordable, highly accurate rifle, which makes it a great starter gun for new precision shooters. It can be a little on the heavy side, but there is a good reason it’s such a popular rifle.
Overall, I think Ruger hit it out of the park with the original RPR, and while the Gen III model might not light the world on fire like the Gen I did, but it certainly has enough little improvements and changes to still be worth the cost of admission if you don’t already have a precision rifle. Ruger Precision Gen 3 Rifle
Ruger Precision Rifle (RPR) Review (GEN III) 6.5 Creedmoor
By FRED TOAST FROM gunsdiscreetsupplies.com
Ruger deserves a lot of praise for the Ruger Precision Rifle. Introduced in 2015 the RPR was the first purpose-built chassis-style precision rifle available from a major manufacturer. The gun tested in this post represents the latest, third generation RPR. Since the introduction of the RPR, the rest of the industry has taken note, and responded with similar products of their own.
Since they are so common I never reviewed or tested an RPR on gunsdiscreetsupplies.com. In fact, I never shot one until I started testing for this post (I know, shame on me). Part of that was I didn’t have a relationship with Ruger where I could request a demo gun, and part of that was just me being stubborn. Frankly, I’m skeptical of the reviews I read in print and online. I’m immediately suspect when the commercial print and online gun media starts to push a product (that’s why I started this site).
So why review an RPR? Why now? I recently opened a retail store with my friend Doug. When we were ordering inventory, Doug was adamant that we stock Ruger RPRs. Since he has a strong background in retail firearm sales, we ordered some for inventory. After handling some of the generation 3 guns we had in stock, I decided it was time to pull one off the shelf and head to the range.
The test gun shown in the post is a Ruger Precision Rifle part number 18046. It is a standard RPR chambered in 6.5 Creedmoor and coated from the factory in Barrett Brown Cerakote. It is an exclusive run made for Davidson’s, a firearms distributor. While its color is different from a standard RPR, all other features should be considered the same (this one will probably look a little bit cooler in pics through). Ruger Precision Gen 3 Rifle
This test gun is equipped with a 24″ barrel that is threaded 5/8-24 and includes a muzzle brake. Ruger offers the precision rifle in additional calibers including 308 Winchester, 243 Winchester, 6 Creedmoor and 223 Remington.
Better late than never
If you work around guns, the first thing you’ll notice about the RPR (or current Ruger products in general) is they don’t try to nickel and dime you. As far as accessories, Ruger includes 2 magazines and a piece of Picatinny rail that has a provision for a QD stud so you can either run a standard Harris bipod or one with a Picatinny adapter. The box the rifle ships in has a Styrofoam insert that fits the rifle and its accessories well.
I equipped my RPR with a Nightforce 8-32x56mmNXS held in a Spuhr mount. A great scope in what may be the best scope mount ever produced. The results I achieve with this rifle will truly be indicative of the rifle’s capabilities and cannot be attributed to a substandard optic or mount. Ruger Precision Gen 3 Rifle
Getting behind the RPR
Settling in behind the RPRI began to adjust the rear butt stock to fit me. The folding stock is adjustable for stock weld and length of pull, two adjustments I feel any precision rifle would have. Each adjustment is controlled by a cam with a lever attached. On the opposite side of the cam is knob that can adjust the amount of force it takes to close the cam. Adjustments are made quickly and easily with this system. While I understand many RPR owners upgrade to MAGPUL PRS Stocks, the one that comes with the factory rifle works fairly well.
The RPR folds to allow removal of the bolt. In my opinion this is a critical feature. All too often you’ll encounter precision rifle products that require disassembly and removal of parts to take out the bolt, inspect the bore, or bore sight the old-fashioned way by looking down the tube. Ruger Precision Gen 3 Rifle
The trigger on the RPR has a blade-type safety, similar to a Savage AccuTrigger. Trigger pull measured 2 pounds, 11.5 ounces averaged over five pulls. While it isn’t quite as nice as a custom aftermarket trigger like the Timney, the trigger is far better than the majority of factory triggers on the market.
Each RPR is equipped with an ambidextrous safety located above the shooter’s thumb. The safety has a 45 degree throw and doesn’t impede the path of the shooter’s trigger finger when he is on the rifle.
While the RPR is fairly expensive (over $1,000), it is, in the world of precision rifles fairly inexpensive. To meet this price point you’ll see a reliance on molded plastic and MIM steel parts. The best example of this is the very molded looking”firing pin back”, similar to the Ruger American (I believe that they may be the same part). Ruger Precision Gen 3 Rifle
The RPR uses AICS style magazines. It includes two MAGPUL. magazines from the factory. When the magazine is empty and the bolt is racked to the rear, the magazine follower locks the bolt open, preventing it from closing on an empty chamber. This makes loading individual rounds into the RPR difficult. Substituting a standard metal AICS style magazine allows the RPR bolt to close on an empty magazine without having to push the follower down.
I headed to the range with 19 different hand loads using two powders (H4350 and Varget) and 4 different bullets (Hornady 147 ELD M, Sierra 142 SMK, Lapua 120 Scenar-L and the Sierra 107 TMK) loaded over Starline Brass. I’ll be writing about the performance in a different post, Loading for the Ruger Precision Rifle, which will be published shortly. In the interim, I must say, despite the relatively thin factory barrel shank the RPR performed well. Ruger Precision Gen 3 Rifle
Due to the design of the RPR, the recoil impulse is inline with the barrel. This is very similar to the MDT TAC21 chassis system, making the shooting experience pleasant and enjoyable.
So what are my thoughts on the Ruger Precision Rifle?
- Great entry level rifle. While for entry precision rifles, I still prefer to thread and chamber a custom barrel on a factory action and place it in an MDT LSS stock, the RPR is a great first precision rifle. My rifle had a decent trigger, cycled well and was accurate; 19 loads averaged .839 MOA and the best load was just over 1/2 MOA!
- Nice factory trigger.
- Bolt location is prefect.
- Smooth recoil impulse. Shooting the RPR reminded me of the first time I shot a rifle in the MDT TAC21 chassis. Moving the stock in line with the barrel makes for a smooth shooting rifle.
- Focus on what it does well. While it isn’t a full house custom build, let’s focus on what it does well and not the areas that could use some improvement. Could the RPR front end benefit from a redesign that would end up with a thicker barrel shank, less plastic and MIM parts? Absolutely, but that would drive up costs and defeat the purpose of the RPR.